Concrete Services

A common misconception about cracked concrete is that the slab needs to be completely replaced. What many homeowners don’t realize is that their existing concrete can often be repaired quickly and effectively without a full replacement. Our Oklahoma City cracked concrete repair experts at Vesta Foundation Solutions provide proven concrete leveling and repair solutions that restore your surfaces and eliminate trip hazards.

Depending on the situation of your concrete, there are many different options to repair it. Your Oklahoma City concrete repair experts at Vesta Foundation Solutions are able to diagnose the problem and recommend a viable solution to repair your concrete rather than a complete replacement. Our team uses the top products and technology in the industry to repair your concrete and turn it into a safe and even surface. No matter what type of problems you’re having with your concrete, we offer solutions to level and seal your concrete. All of our products cure quickly so you and your family can safely return to using it.

If you have any concrete slabs that have sunken below the others and created a dangerous trip hazard, we have a quick and effective solution. Our PolyLevel concrete leveling system used in Oklahoma City can quickly lift sunken concrete for a permanent and waterproof result. Unlike outdated concrete lifting methods that use heavy slurry which can wash out over time, our PolyLevel system uses a high-density polyurethane foam that is injected into the ground and instantly expands and lifts your sunken concrete in as little as 15 minutes. If it’s your driveway, sidewalk, patio, or garage floor, PolyLevel can lift it back into place for a safe, even surface.

The PolyLevel Concrete Leveling Process: Step-by-Step

Oklahoma’s challenging clay soils require precision concrete leveling techniques that address both immediate settlement and long-term soil stability. Our PolyLevel injection process provides permanent concrete leveling Oklahoma homeowners can rely on.

Step 1: Site Assessment and Preparation

Pre-Injection Analysis:

• Concrete condition evaluation: Assessment of crack patterns, settlement severity, and structural integrity
• Soil analysis: Understanding Oklahoma clay soil conditions beneath settled concrete
• Load calculation: Determining weight requirements and injection point placement
• Safety preparation: Clearing work area and protecting landscaping and structures

Step 2: Strategic Injection Point Drilling

Precision Hole Placement:

• Hole diameter: 5/8-inch injection ports drilled through concrete slab
• Injection pattern: Strategic grid pattern based on concrete slab size and settlement pattern
• Depth consideration: Drilling through concrete into underlying Oklahoma clay soil
• Spacing optimization: Typically 3-6 feet apart for optimal foam distribution

Step 3: PolyLevel Foam Injection

High-Pressure Injection Process:

• Polyurethane foam composition: Lightweight, high-strength expanding foam specifically designed for concrete leveling
• Injection pressure: Controlled pressure injection fills voids beneath concrete
• Real-time monitoring: Technicians monitor concrete lifting and stabilization progress
• Expansion control: Precise foam expansion prevents over-lifting or concrete damage

Step 4: Soil Stabilization and Void Filling

Deep Soil Treatment:

• Void elimination: PolyLevel foam fills all cavities created by Oklahoma’s shrinking clay soil
• Soil compaction: Expanding foam compresses loose soil beneath concrete
• Root barrier creation: Foam creates barrier preventing future root intrusion
• Moisture protection: Closed-cell foam resists moisture penetration

Step 5: Surface Restoration and Curing

Project Completion:

• Hole sealing: Injection ports sealed with color-matched concrete filler
• Surface cleaning: Complete cleanup of work area and concrete surface
• Curing time: PolyLevel fully cures within 24 hours
• Quality inspection: Final verification of concrete leveling results and slab stability

Why PolyLevel Works Better in Oklahoma

Oklahoma’s expansive clay soils create unique challenges that outdated concrete lifting methods cannot address. PolyLevel concrete leveling provides superior results because:

• Lightweight formula: PolyLevel weighs only 2-4 lbs per cubic foot, reducing stress on Oklahoma’s unstable clay soils
• Moisture resistant: Closed-cell polyurethane foam does not absorb water, critical for Oklahoma’s wet seasons
• Permanent solution: Unlike heavy slurry injection methods that can wash out, PolyLevel maintains structural integrity indefinitely
• Minimal disruption: Small 5/8-inch holes versus large access points required by traditional methods
• Fast curing: Walk on treated concrete within 15 minutes; drive on it within 24 hours
• Eco-friendly: Inert polyurethane foam is safe for Oklahoma’s soil and groundwater

Pool Deck Leveling Near Me: Oklahoma Pool Deck Repair

A sunken or uneven pool deck is more than an eyesore. It creates trip hazards for your family, channels water toward your foundation, and compromises the structural support around your pool. Oklahoma’s clay soils expand and contract with seasonal moisture changes, making pool deck settlement one of the most common concrete issues we address.

Our PolyLevel pool deck leveling process lifts settled concrete slabs back to their original position without the mess and extended downtime of full replacement. Because PolyLevel foam is waterproof and lightweight, it is the ideal solution for concrete near pools where moisture exposure is constant.

Common pool deck leveling scenarios we handle:

• Sunken concrete around in-ground pools creating tripping hazards
• Uneven pool deck sections directing water toward the house foundation
• Cracked and settled pool deck coping and expansion joints
• Settled concrete patios adjacent to pool areas

Oklahoma Concrete Leveling Success Stories: Real Before/After Results

Our PolyLevel concrete leveling system has helped hundreds of Oklahoma homeowners restore their driveways, sidewalks, patios, and pool decks. Here are representative results from projects across the OKC metro:

Oklahoma City Driveway Settlement

• Problem: 2-inch driveway settlement near garage, creating trip hazard and water pooling
• Solution: PolyLevel injection at 8 strategic points along driveway joints
• Result: Driveway raised to level within 30 minutes; homeowner drove on it the next day
• Timeline: Complete project finished in under 4 hours

Tulsa Patio and Walkway Repair

• Problem: Multiple patio slabs and connecting walkway settled 1.5 inches, creating uneven surface
• Solution: PolyLevel foam injection with soil stabilization beneath all affected slabs
• Result: Entire patio and walkway lifted to uniform height; underlying soil stabilized
• Timeline: Project completed in a single afternoon

Edmond Commercial Sidewalk Restoration

• Problem: Commercial sidewalk panels settled 2+ inches, creating ADA compliance concerns
• Solution: PolyLevel injection across 12 sidewalk panels with void filling underneath
• Result: All panels restored to level; business remained open during the entire repair
• Timeline: Completed in one business day with zero disruption to foot traffic

What Types of Concrete Can Be Leveled?

PolyLevel concrete leveling works on virtually any concrete slab resting on soil. Our Oklahoma City concrete leveling team regularly lifts and levels:

• Driveways: Sunken driveway panels, settled garage aprons, and sloped driveway sections
• Sidewalks: Trip hazards from settled sidewalk panels, both residential and commercial
• Patios: Backyard and front porch concrete patio slabs pulling away from the house
• Pool decks: Settled concrete surrounding in-ground pools
• Garage floors: Interior garage concrete that has settled or heaved
• Stoops and steps: Front and back entry concrete that has sunk below the threshold
• Warehouse and commercial slabs: Large-format concrete floors in commercial and industrial buildings

Concrete Leveling FAQ: Common Questions from Oklahoma Homeowners

What is concrete leveling?

Concrete leveling is the process of lifting and restoring sunken or uneven concrete slabs to their original position. At Vesta Foundation Solutions, we use the PolyLevel system, which injects high-density polyurethane foam beneath the settled slab through small 5/8-inch holes. The foam expands, fills voids in the soil, and lifts the concrete back to level. This is a permanent, minimally invasive alternative to tearing out and replacing settled concrete.

How does concrete leveling work?

The PolyLevel process begins with drilling small injection ports through the settled concrete slab. A specialized polyurethane foam is injected through these ports into the void space beneath the slab. As the foam expands, it fills cavities, compresses loose soil, and gradually lifts the concrete back to its original height. Our technicians monitor the lift in real time to achieve precise leveling. The injection holes are sealed with color-matched filler, and most projects are complete in just a few hours.

How long does concrete leveling last?

PolyLevel concrete leveling is engineered to be a permanent solution. The polyurethane foam does not deteriorate, wash out, or compress over time. Because it is moisture-resistant and lightweight (only 2-4 pounds per cubic foot), it does not create additional stress on Oklahoma’s clay soils. Most PolyLevel repairs carry a warranty for your peace of mind.

Can you level a concrete driveway without replacing it?

Yes. PolyLevel concrete leveling is specifically designed to lift and level existing driveways without demolition or replacement. The process uses small injection holes (5/8 inch) that are virtually invisible after repair. Most driveways can be driven on again within 24 hours of treatment, compared to the 7-10 day curing period required for a full concrete pour.

Is concrete leveling a permanent fix?

When performed with the PolyLevel system, concrete leveling is a permanent repair. The polyurethane foam stabilizes the underlying soil while lifting the slab, addressing the root cause of settlement. This dual-action approach prevents the concrete from sinking again, even in Oklahoma’s expansive clay soil conditions. Vesta Foundation Solutions backs our concrete leveling work with a warranty.

What areas in Oklahoma do you serve for concrete leveling?

Vesta Foundation Solutions provides concrete leveling services throughout Oklahoma, including Oklahoma City, Tulsa, Edmond, Norman, Moore, Broken Arrow, Midwest City, Owasso, Bixby, Stillwater, Bartlesville, and all surrounding communities. Schedule a free inspection to have one of our concrete leveling specialists assess your property.